Front Wheel Steering Assembly Turned to the front Axle ZX2 Steering System

Turned to the front axle ZX2 model (rudder) are a set of complete DIY car steering systems and 9 g servo control. To install this product in the front of your homemade car, you can implement a simple steering effect. This is the rudder model, if you don’t know how to use the steering gear, try not to choose and buy, can store the choose and buy ordinary electric aircraft ZX1 front axle.

Product size: 13.5 * 4.5 * 6 cm

The wheel adapter wheels: a pore size of 2.5 mm

The function of return: no not automatically reset after (to)

Servo drive motor: 9 g (4.8 V to 6 V)

Steering gear speed: 0.12 seconds without load / 60 degrees (4.8 V)

Locked-rotor torque: 1.2-1.4 kg/cm (4.8 V)

Method of use: steering gear is different from the common dc motor using the method, in the middle of the red line – positive, brown line – negative, and orange line – signal (usually can use MCU or rc remote control receiver give it signals, when receiving a continuous signal will rotate)