5A 5-36V to 1.25-32V Constant Voltage Current DC-DC Buck Power Module with Display

5A constant voltage constant current step-down power supply module with display LED drive lithium battery charging
With voltage, current, power display, easy to use without a multimeter, powerful!
With USB interface, with 3 major functions, it can be used in most of your occasions!

Module highlights：
1. On-board voltage, current and power meter, you can easily use this module without a multimeter, which is simpler and more intuitive.

2. Onboard USB interface for easy charging of your digital products. (Note: The USB output voltage is the same as
the module output voltage. It is not a fixed 5V output. Please confirm before charging the USB device.)

3. High power, high efficiency, 5A, low ripple;

4. Three major functions:
(1) Used as a normal step-down module with overcurrent protection capability;

(2) Used as a charger for various voltage lithium batteries, batteries, nickel-cadmium nickel-hydrogen batteries (battery packs), for solar panels, wind turbines, etc.;

(3) used as a high power LED constant current drive module;

5. There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in;

6. When used as a lithium battery charger, you can set the float voltage and charge current.

Is it charging or already full;
7. With current limiting protection, the module will not burn out even if the output is shorted.

8. The onboard voltage and ammeter can be self-calibrated, and there will never be any inaccuracies!

Module parameter
Input voltage: 5-36V

Output voltage: 1.25-32V continuously adjustable

Output current: adjustable, up to 5A

Output power: up to 75W

Working temperature: -40~+85 degrees

Working frequency: 180KHz

Module size: length 68.2mm width 38.8mm height 15mm

Quantity: 1PCS.