Communication, Programmers, Programmers & Debugging, Related Accessories, Serial Communication, Show All Communications, TTL Converters
Compare
TTL UART Module Converter CP2102 STC
SKU: COM0218
Availability:
In stock
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
රු790.00 or 3 X රු263.33 with
In stock
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
Supported data format is 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware handshaking or X-ON/X-OFF
Package Included:
1 x 6Pin USB 2.0 to TTL UART Module Converter CP2102 STC Replace FT232 CF
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Communication, Modules, Radio Frequency, Show All Communications, Show All Modules
GT-24 Digital Transmission Wireless 2.4G NRF24L01+PA+LNA 1100 meters long distance Module
Communication, Modules, Radio Frequency, Show All Communications, Show All ModulesGT-24 Digital Transmission Wireless 2.4G NRF24L01+PA+LNA 1100 meters long distance Module
The GT-24 module is a 2.4Gz, 100mW, high speed (the highest air rate can reach
To 2Nos), high stability, wireless transceiver integrated data transmission module. Module comes with high
Performance PCB antenna, impedance matching, using nRF24L01P RF chip, ratio
nRF24L01 has higher reliability, more power levels, and farther transmission
SKU: COM0244 -
Bluetooth, Bluetooth Module, Cases / Covers / Holders, Communication, Modules, Related Accessories, Show All Communications
Bluetooth Serial Transceiver Interface Base Board For HC-06 HC-07 HC-05 BC-04
Bluetooth, Bluetooth Module, Cases / Covers / Holders, Communication, Modules, Related Accessories, Show All CommunicationsBluetooth Serial Transceiver Interface Base Board For HC-06 HC-07 HC-05 BC-04
1: The factory chip production , stable and reliable quality
2: Power anti-reverse , reverse power does not work
3 : Input voltage 3.6 ~ 6V, must not exceed 7V! !
4: common variety of models can be installed Bluetooth
module , such as HC05, HC06, HC07, BC04 , or other
SKU: COM0246 -
Communication, GSM/GPRS/GPS Module, GSM/GPS/GPRS, Modules, Show All Communications, Show All Modules
Smallest SIM800L GPRS GSM Module
-
Communication, Modules, Radio Frequency, Show All Communications, Show All Modules
Wireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Communication, Modules, Radio Frequency, Show All Communications, Show All ModulesWireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Power supply voltage : 3.2 V — 5.5 V.(if the modules working long hours in emission state, suggested that when the power supply voltage is greater than 4.5 V , you need concatenating a 1N4007 diode to avoid module built-in LDO got fever)
Default communication distance : about 600 m (communication distance is adjustable up to 1000 m, air baud rate 5000 BPS).
Default idle current: 16 ma (modules in different working mode of different current).
SKU: COM0222
There are no reviews yet.