Servo Controller Steering Gear Tester Module 5V for SG90 MG995 MG996 MG90S

Servo Controller Steering Gear Tester Module 5V for SG90 MG995 MG996 MG90S

The steering gear tester is controlled by a single-chip microcomputer, and there are three control modes, which can be switched by buttons. They are manual mode, return to center mode and automatic mode.

The blue status light also changes when the function is switched. With anti-reverse connection function. High stability and good accuracy.

Features

1. Manual mode: Rotate the potentiometer, and the servo will also rotate accordingly. High time from 0.5ms to 2.5ms

2. Return to center mode: automatically return to the center position of the servo. High level time is 1.5ms

3. Automatic mode: Automatically test the minimum angle and maximum angle of the servo. High time from 0.5ms to 2.5ms.

4. With anti-reverse connection circuit, there is no need to worry about the problem of reverse connection burning.

5. It can be connected to two steering gears at the same time and tested at the same time.

6. The power supply input voltage is 5V