Camera Module, Communication, ESP32 Wi-Fi Boards, Modules, Mother Boards, Show All Modules, Show All Wi-Fi Boards, Wi-Fi Series Boards, Wi-Fi Transceiver Modules, Wi-Fi Transceivers
Compare
OV2640 Camera Module 2MP Mini CCM Compact Camera
SKU: ML2057-A
Availability:
In stock
OV2640 Camera Module 2MP Mini CCM Compact Camera
රු890.00 or 3 X රු296.67 with
In stock
OV2640 Camera Module 2MP Mini CCM Compact Camera
This CCM (compact camera module) based on an OV2640 sensor, constructed with a high quality stock lens and FPC with 24 pin Goldfinger interface. It’s mini but used widely, highly recommended for STM32, ESP32, ESP8266, and other low-end ARM and RISC microcontrollers.
This 2MP mini Compact Camera Module is based on the 1/4″ OV2640 SOC sensor, which has an on-chip ISP, so as to do auto-exposure, auto-white balance to represent a nice image.
Resolution: 1600 x 1200 (UXGA)
Maximum Image Transfer Rate: 15fps@1600×1200, 30fps@SVGA, 60fps@CIF
Output Format: YUV/RGB/Raw RGB Data
Power Supply:
Core: 1.3V DC ± 5%
Analog: 2.5~3.0V DC
I/O: 1.7V to 3.3V
Power Consumption:
YUV mode full res & framerate: 125mW
Compressed mode full Res & framerate: 140mW
Standby:600μA
Image Sensor Format: Type 1/4″
Maximum Image Transfer Rate: 1600×1200@15fps, SVGA@30fps, CIF@60fps
Sensitivity: 0.6V/Lux-sec
S/N Ratio: 40dB
Dynamic Range: 50dB
Pixel Size: 2.2 x 2.2 μm
Dark Current: 15mV/s at 60°C
Shutter Type: Rolling Shutter
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Bluetooth, Bluetooth Module, Cases / Covers / Holders, Communication, Modules, Related Accessories, Show All Communications
Bluetooth Serial Transceiver Interface Base Board For HC-06 HC-07 HC-05 BC-04
Bluetooth, Bluetooth Module, Cases / Covers / Holders, Communication, Modules, Related Accessories, Show All CommunicationsBluetooth Serial Transceiver Interface Base Board For HC-06 HC-07 HC-05 BC-04
1: The factory chip production , stable and reliable quality
2: Power anti-reverse , reverse power does not work
3 : Input voltage 3.6 ~ 6V, must not exceed 7V! !
4: common variety of models can be installed Bluetooth
module , such as HC05, HC06, HC07, BC04 , or other
SKU: COM0246 -
Communication, GSM/GPRS/GPS Module, GSM/GPS/GPRS, Modules, Show All Communications, Show All Modules
GSM/GPRS SIM900 Board Quad-Band Module
Communication, GSM/GPRS/GPS Module, GSM/GPS/GPRS, Modules, Show All Communications, Show All ModulesGSM/GPRS SIM900 Board Quad-Band Module
100% brand new and high quality
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
SKU: COM0211 -
Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All Modules
HC-05 6 Pin Bluetooth Integrated Serial Pass-Through Module Master-Slave Wireless
Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All ModulesHC-05 6 Pin Bluetooth Integrated Serial Pass-Through Module Master-Slave Wireless
1. The core module uses HC-05 slave module, and the interface includes VCC, GND, TXD, RXD, KEY pin, Bluetooth connection status lead (STATE).
2. LED light indicates Bluetooth connection status.
3. The backplane is equipped with anti-inversion diode, with 3.3V LDO, input voltage 3.6~6V.
4. Effective open ground distance is 10 meters (CLASS 2)
5. Support standard baud rate from 4800bps~1382400bps.
SKU: COM0245 -
Communication, Modules, Radio Frequency, Show All Communications, Show All Modules
Wireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Communication, Modules, Radio Frequency, Show All Communications, Show All ModulesWireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Power supply voltage : 3.2 V — 5.5 V.(if the modules working long hours in emission state, suggested that when the power supply voltage is greater than 4.5 V , you need concatenating a 1N4007 diode to avoid module built-in LDO got fever)
Default communication distance : about 600 m (communication distance is adjustable up to 1000 m, air baud rate 5000 BPS).
Default idle current: 16 ma (modules in different working mode of different current).
SKU: COM0222
There are no reviews yet.