LM2596 CC CV+LED Volt/Amp Meter DC 5V/12V Buck Converter

Description:

The 0.36-inch voltmeter ammeter LED digital tube, voltmeter resolution 0.1 V, ammeter resolution 0.01 A, with Red and Yellow LED digital tube

Non-isolated step-down constant current, constant voltage module (CC CV) charging module

Input voltage: 7-26V

Output voltage: continuously adjustable (1.25-25V)

Minimum Voltage difference: 2V

Output current: rated 2.5A, the largest 2.5A (more than 15W, please install the heat sink)

Constant current range :0-2.5A (adjustable)

Size: ultra-small size 49 (W) * 70 (L) * 17 (H) mm (without potentiometer)

Output power: natural cooling 15W, 25W with heatsink

Conversion efficiency: up to 92% (output voltage higher, higher the efficiency)

Output ripple: 20M bandwidth (for reference only)

Input 12V Output 5V 2.5A 60mV (MAX)

Operating temperature: Industrial grade (-40 c to +85 c)

(ambient temperature exceeds 40 degrees, lower power use, or add one heatsink)

Full load temperature rise: 45 °C

No-load Current: Typical 10mA (12V switch to 4.2V)

Load regulation: ± 1%

Voltage regulation: ± 0.5%

Dynamic response speed: 5% 200uS

Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)

Indicator: Yellow LED constant current, red LED work, fully charged green LED

Output short circuit protection: Yes, constant current (constant current value of the current settings)

Input reverse polarity protection: No, please comply with our plate or in the input reverse polarity protection diode in series.

Other please refer to the manual.

1 x DC Buck Converter