Desoldering Pump Suction Tin Gun Soldering Sucker high quality 135

Specifications:

Range of temperature regulation: 1°

Scope of application: Tin removal

Net weight: approx. 40g

Length: approx. 200mm/7.87\’\’

Material: Half aluminum half plastic / whole aluminum

Maximum suction: 30

Color: Blue/Gold

Operation Manual:

1. Put the tin suction piston downward pressure to get stuck.

2. Heating solder joints to solder melting with an electric soldering iron.

3. Remove the iron and quickly put the tin suction resistance paste solder, solder sucker and press the button.

4. If It is not clean at one time and can be repeated many times.

Using skills:

1. To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good.

2. The aperture tin suction heads are of different sizes, select the appropriate specifications.

3. Tin suction head wears, should replace with the new one.

4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.

5. Head contact pads are