60W Digital Soldering Iron Adjustable Temperature Ceramic Heater

1. LCD digital display adjustable thermostat soldering pen is small
2. Unique conjoined welding head, easier to replace
3. The accuracy of 5 degrees adjustable speed (+ /-) temperature
4. Back to temperature speed by just 0.5 seconds (applicable to lead-free soldering)
5. Fast heating you just need to 8 seconds to the expected temperature
6. Adopt wear-resisting corrosion resistance to high temperature anti-static materials production
7. Personality and heat insulation design, excellent handle diameter of comfort
Memory function 8. Temperature (without computer control)
9. The voltage can be used for 220 v / 110 v (by state voltage standard choose)
10. Microcomputer temperature calibration function (temperature accuracy + /-2 degrees)
11. Three feet grounded power cord anti-static handle in accordance with international standards
Power: 60 w
Temperature range: 180℃ to 500℃
The input voltage:  220 v
Tip for ground impedance: <2
Tip of voltage <2 m V
Adjustable temperature: + /-5
Temperature error: <5 (due to the different tip contact)
Directions for use:
1.Plugged in long press the red “*” key for 3 to 5 seconds to open it.
2.Long press the red “*” key for 3 to 5 seconds to shut down.
3.Can be set up according to the requirements of using temperature after open, press the blue heating or minus WenJian each time you press the temperature of 5 ° and after setting mode to save memory.
4.LED digital beats after set temperature reaches the set temperature stops beating, after this time into the constant temperature state, the LCD monitor right there will be a “C” twinkling.
Welding head replacement
(1) counterclockwise to unscrew the title “the iron contact” (as shown in figure 1)
2. The new welding head on the soldering iron connecting point screw clockwise
The temperature calibration instructions:
1.LCD screen display temperature with a thermometer measured temperature when there is a deviation can be calibrated through the following range (20 degree)-
2.Measuring temperature deviation after plug open, gently press a red “*” key to enter temperature compensation.
3.Such as soldering iron temperature is lower than the measurement temperature measuring instrument, the need to press blue heating up comes at a time, until the temperature with a thermometer temperature.
4.Soldering iron temperature higher than the temperature measuring instrument, such as test is negative, according to blue WenJian reduction until the temperature with a thermometer temperature