48-64V 60A 2000W square wave brushless controller
Rated Voltage: 48V-64V
Low Voltage : 42V±0.5V
Rated Power: 2000W
Limit Current:60A
1.self-learning
2.electric lock
3.low brake
4.reverse line
5.high brake
6.hall(5wires)
7.throttle
8.3-speed (low/middle/high)
9.Anti-theft power supply
10.Anti-theft signal
11.Multi data instrument cable
12.pointer meter line
13.battery (red battery+, black battery-)
14.phase wires
how to connect line?
1.connect the phase wires
2.connect hall wires(color to color connection,if motor without hall line, don’t need connect hall line)
3. connect the battery line(red:battery + , black:battery-)
4. connect the controller throttle line to throttle, controller electric lock connect to throttle electric lock
(if throttle not have electric lock,the electric lock 2 wires of the controller can be docked together,let they short)
5.off power,let two self-learning lines connect together,open power,the wheel will forward or reverse.
(1.if wheel forward ,Separate the self-learning line.
2.if wheel reverse, Separate the self-learning line.then let two self-learning line connect together again,
if wheel forward ,Separate the self-learning line.)
The self-learning step is to enable the controller to match the motor phase,
adjust the direction of motor operation, and also adapt to the battery voltage
note:when use throttle control speed,two self-learning lines must separate.
6.other functions can be connected as needed.













There are no reviews yet.