Presser Sensors, Sensors, Show All Sensors
BMP280-3.3 Precision Atmospheric Pressure Altimeter Sensor Hw-611 GY-BMP280
SKU: SEN1505-2
Availability:
Out of stock
BMP280-3.3 Precision Atmospheric Pressure Altimeter Sensor Hw-611
රු180.00 or 3 X රු60.00 with
Out of stock
This is a connection board with a Sensortec ME280 temperature, humidity and pressure sensor.
The board has a selectable I2C address jumper (GS2 solder link), I2C pull up resistors, 2.54mm 7-pin header and two 3.5mm mounting holes.
Default board configuration; Single power rail Vdd = Vdd_IO (GS1 solder link), Pull-up resistors (R2, R3) 10K, Protocol Selector resistor 0ohm (R1), Decoupling capacitors 0.1uF on both Vdd and power supply pins Vdd_IO.
If you connect the board to both the VDD_IO 1.8V and VDD 3.3V power rails, be sure to remove the GS1 jumper from the power rail.
BME280 Features
Package 2.5mm x 2.5mm x 0.93mm LGA metal cap
Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wires, up to 10 MHz)
Supply voltage VDD Main supply voltage range: 1.71V to 3.6V
VDDIO interface voltage range: 1.2V to 3.6V
Current consumption 1.8 uA @ 1Hz humidity and temperature
2.8 uA @ 1Hz pressure and temperature
3.6 uA @ 1Hz humidity, pressure and temperature
0.1 uA in sleep mode
Operating range -40…+ 85 C, 0…100% Rel. Humidity, 300…1100 hpa – humidity and pressure sensors can be activated/deactivated independently
Package included:
BME280 Digital Barometric Pressure, Humidity and Sensor Breakdown Temperature I2C/SPI, 1 pcs
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.