DMX512 Transceiver PCB Module 2.4G LED Stage Light Transceiver

DMX512 Transceiver PCB Module 2.4G LED Stage Light Transceiver

Product name: 2.4G wireless DMX512 transceiver template
Convenient to use: small size, easy to be embedded in the interior of the lamp, single-button operation
Three-color LED display Input voltage: 5VDC Operating
Frequency band: 2.4G ISM, 126 frequency bands
Transmission power: 20dBm
Receiving sensitivity: – 94dBm
Signal interface: RS485 or CPU serial port AURT
Operating manual:

ID code and LED color corresponding correlation:
1:RED
2: GREEN
3:RED+GREEN = YELLOW
4:BLUE
5:RED+BLUE = PURPLE
6:GREEN+BLUE = CYAN
7:RED+GREED+BLUE = WHITE

Press key 1 time to indicate ID setting, Press again to set IC, then ID value adding 1 each time by press

Working condition:
LED constant light up : no DMX or signal
Red LED flash : transmitting
Green LED flash: Receivin
RF frequency–2.400-2.525 G, total 126 channels, it is searching automatically
ID Code——-“1-7” groups ID code, press “key” button for setting, it only can work under same ID code of transmitter and receiver

Establishing Communication:
Power on DMX512 received board and transmitted board
Press “key” button to set same ID value of transmitted board and received board, please use different ID value if you need use more than 1 group net at same time in same place
The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash faster once