, , , , , ,

3S 40A BMS 11.1V 12.6V 18650 Balanced Version Lithium Battery Protection Board

SKU: ML2167
Availability:

In stock


3S 40A 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)

Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)

Product Size: 42 * 60 * 3.4mm (balanced version)

Product weight: 9.8g (balanced version)

Charging voltage: 12.6V – 13.6V

Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)

Continuous charge current (upper limit): 20A

Balance version: suitable for starting current below 80A, power 170W below the drill.

 

රු690.00

In stock

Compare

3S 40A 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)

Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)

Product Size: 42 * 60 * 3.4mm (balanced version)

Product weight: 9.8g (balanced version)

Charging voltage: 12.6V – 13.6V

Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)

Continuous charge current (upper limit): 20A

Balance version: suitable for starting current below 80A, power 170W below the drill.

New Balance version: It is suitable for electric drills with a starting current of 80A or less, power of 170W or less, or motorcycles of less than 250CC. It has a balanced charging function and is compatible with ordinary batteries with poor discharge capability.

Note 1:

1): Balance version, start the drill requires 3 10C-20C power batteries, or 6 5C-10C power batteries (recommended power battery models: SONY VTC4, VTC4A, VTC5A)

Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, do not deliberately short circuit.

Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor’s positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.

Note 4: 3 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. In the Discharge test, the voltage drops faster battery the group is poor battery.

For some of the poor basis of electronic customers to explain: the balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity/resistance closer to the better! (2 good battery +1 Poor battery use effect = 3 poor battery use effect).

Package includes:

1* 3S 40A Protection Board

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

SHOPPING CART

close