Communication, Modules, RC / Quad-Copters, RC Transmitters / Receivers, Robotics, Show All Communications, Show All RC, Show All Robotics, Transmitters / Receivers, TX / RX, TX / RX & Radio
Compare
Walkera RX 1002 HM-DEVO-RX1002-W Devention 10CH 2.4GHz Receiver
SKU: COM0292
Availability:
In stock
Walkera RX 1002 HM-DEVO-RX1002-W Devention 10CH 2.4GHz Receiver
රු6,650.00 or 3 X රු2,216.67 with
In stock
Type: 2.4GHz 10 channels
Sensitivity: -105dbm
Frequency Interval: ≥ 4M
Weight: 14.3g
Dimension: 39X29X14.5mm
Receiver Battery: 4.8V1100mAh
Features
Adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features fast reaction and strong anti-jamming protection.
Double-receiving circuits effectively assure the stability of receiving signal.
The Single Chip Micyoco as CPU provides the super-strong analyzing ability.
The output of signals simultaneously increases the ability to synchronization
11 Millisecond and 22 Millisecond Frame Rate selectable.
The RECEIVER maintains the frequency and the ID memories when its changing a new battery pack with the transmitter powered on.
It can be customized set as a fixed ID and automatic ID assignment.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Communication, Programmers, Programmers & Debugging, Related Accessories, Serial Communication, Show All Communications, TTL Converters
ELM327 Interface Bluetooth V2.1 Bluetooth OBD-II OBD2 OBD Car Scanner
Communication, Programmers, Programmers & Debugging, Related Accessories, Serial Communication, Show All Communications, TTL ConvertersELM327 Interface Bluetooth V2.1 Bluetooth OBD-II OBD2 OBD Car Scanner
ELM327 Interface Bluetooth V2.1 Bluetooth OBD-II
SKU: COM0313 -
Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All Modules
HC-05 6 Pin Bluetooth Integrated Serial Pass-Through Module Master-Slave Wireless
Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All ModulesHC-05 6 Pin Bluetooth Integrated Serial Pass-Through Module Master-Slave Wireless
1. The core module uses HC-05 slave module, and the interface includes VCC, GND, TXD, RXD, KEY pin, Bluetooth connection status lead (STATE).
2. LED light indicates Bluetooth connection status.
3. The backplane is equipped with anti-inversion diode, with 3.3V LDO, input voltage 3.6~6V.
4. Effective open ground distance is 10 meters (CLASS 2)
5. Support standard baud rate from 4800bps~1382400bps.
SKU: COM0245 -
Communication, Modules, Radio Frequency, Show All Communications, Show All Modules
Wireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Communication, Modules, Radio Frequency, Show All Communications, Show All ModulesWireless Transceiver Long Range HC-12 SI4463 433Mhz 1000m
Power supply voltage : 3.2 V — 5.5 V.(if the modules working long hours in emission state, suggested that when the power supply voltage is greater than 4.5 V , you need concatenating a 1N4007 diode to avoid module built-in LDO got fever)
Default communication distance : about 600 m (communication distance is adjustable up to 1000 m, air baud rate 5000 BPS).
Default idle current: 16 ma (modules in different working mode of different current).
SKU: COM0222 -
Audio Amplifier MP3, Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All Modules
JDY-62 Bluetooth Stereo Audio Dual Channel Module
Audio Amplifier MP3, Bluetooth, Bluetooth Module, Communication, Modules, Show All Communications, Show All ModulesJDY-62 Bluetooth Stereo Audio Dual Channel Module
VCC: voltage range 4.2V to 5V, in particular, can not exceed 5V power supply
GND: Power
L: Left channel output
R: Right channel output
MUTE: high level when muted, normally low
KC: Empty Pin
SKU: COM0248
There are no reviews yet.