Drivers & Controllers
Showing 1–25 of 29 results
-
CNC / 3D Printers, Drivers & Controllers, LCD / LED / TFT Displays, LCD Displays, Related Accessories, Show All Accessories, Show All CNC
2004 LCD Display 3D Printer Smart Adapter Controller Reprap Ramps 1.4 1.6 with cable Controller
CNC / 3D Printers, Drivers & Controllers, LCD / LED / TFT Displays, LCD Displays, Related Accessories, Show All Accessories, Show All CNC2004 LCD Display 3D Printer Smart Adapter Controller Reprap Ramps 1.4 1.6 with cable Controller
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included.
This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.
SKU: DP0825 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC
3D Printer Board MKS Gen L V1.0 Controller support A4988/8825/TMC2208/TMC2100 drivers
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC3D Printer Board MKS Gen L V1.0 Controller support A4988/8825/TMC2208/TMC2100 drivers
Support a variety of stepper drivers such as A4988, DRV8825, TMC2130 and LV8729, available to change the stepper drivers and motors as users like.
Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
Use high-quality MOSFET, better cooling and more stable.
2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.
Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.
SKU: CNC4679 -
CNC / 3D Printers, Drivers & Controllers, Other CNC Accessories, Show All CNC
3D Printer RAMPS 1.4 Kit Mega 2560 R3 +4PCS A4988 Stepper Drivers
CNC / 3D Printers, Drivers & Controllers, Other CNC Accessories, Show All CNC3D Printer RAMPS 1.4 Kit Mega 2560 R3 +4PCS A4988 Stepper Drivers
RepRap Mega Pololu Shield, or RAMPS for short.It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.RAMPS interfaces an Ard Mega with the powerful Ard MEGA platform and has plenty room for expansion.The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. additionally, a number of Ard expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack Version 1.4 uses surface mount capacitors and resistors to further cover edge issue
SKU: CNC4528 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics
5 Axis CNC Breakout Board Interface Stepper Driver Controller
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics5 Axis CNC Breakout Board Interface Stepper Driver Controller
1. Fully support MACH3 and other computer software to support parallel control.
2. USB power supply and external power supply phase separation, protection of computer security.
3. The external wide voltage input, 12-24V, and anti-reverse function.
4. All the input signal all by the optical lotus isolation, can be emergency stop, knife, limit, etc., to protect the computer security.
SKU: CNC4501 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Other CNC Accessories, Robotics, Show All CNC
A4988 DRV8825 Stepper Motor Driver Control Extension Shield For CNC 3D Printer
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Other CNC Accessories, Robotics, Show All CNCA4988 DRV8825 Stepper Motor Driver Control Extension Shield For CNC 3D Printer
1. For A4988 / DRV8825
2. Jumpers are hit on the DP position representing 16 segments (4988) or 32 segments (8825).
3. Jm connected to the motor.
4. Jv connect 5V and 12V-24V power supply
5. Jc E / S / D / G corresponding to the connection on the Enable Step Dir Gnd drive signal output.
6. Size: 34x41mm
SKU: CNC4706 -
CNC / 3D Printers, Drivers & Controllers, Other CNC Accessories, Show All CNC
CNC Shield V3.0 Stepper Motor Drivers Shield
CNC / 3D Printers, Drivers & Controllers, Other CNC Accessories, Show All CNCCNC Shield V3.0 Stepper Motor Drivers Shield
One, Introduction
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
Two, UNO for Arduino module IO port correspondence introduction.
IO corresponding figure aboveSKU: CNC4518 -
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNC
CNC Shield+4Pcs A4988 Stepper Motor Drivers
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNCCNC Shield+4Pcs A4988 Stepper Motor Drivers
Version: 3.0
Color: Red
Size(L*W*H): Approx. 68 x 53 x 18 mm
Voltage:DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
SKU: CNC4504 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC
DM542 Stepper Motor Controller 2-phase Digital Stepper Motor Driver 18-48 VDC Max. 4.2A for 57 86 Series Motor
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNCDM542 Stepper Motor Controller 2-phase Digital Stepper Motor Driver 18-48 VDC Max. 4.2A for 57 86 Series Motor
DM542 is a new type of two-phase hybrid stepping motor driver, The drive voltage of which is from 20VDC to 50VDC. It is designed for use with a 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor to run smoothly almost without noise and vibration.
SKU: MOD3020 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Other CNC Accessories, Robotics, Show All CNC
DRV8825 A4988 42 Stepper Motor Driver 3D Printer Control Shield Module
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Other CNC Accessories, Robotics, Show All CNCDRV8825 A4988 42 Stepper Motor Driver 3D Printer Control Shield Module
DRV8825 A4988 42 Stepper Motor Driver 3D Printer Control Shield Module in sri lanka
SKU: CNC4756 -
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNC
DRV8825 Stepper Motor Driver With Heatsink
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNCDRV8825 Stepper Motor Driver With Heatsink
The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier is almost the same, so it can be used as a better performance of the pull-down menu board replacement in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 – 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).
SKU: CNC4530 -
CNC / 3D Printers, Drivers & Controllers, Heat Bed & Accessories, Show All CNC
Hot Bed Power Expansion Board Heating Controller Module 25A 12V or 24V for 3D Printer
CNC / 3D Printers, Drivers & Controllers, Heat Bed & Accessories, Show All CNCHot Bed Power Expansion Board Heating Controller Module 25A 12V or 24V for 3D Printer
3D Printer Hot Bed Power Expansion Board Heating Controller MOSFET High Current Load Module 25A 12V or 24V for 3D Printer
The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
This high-power module is a general add-on heated bed power expansion module for 3D printers.
SKU: CNC4689 -
CNC / 3D Printers, Drivers & Controllers, LCD / LED / TFT Displays, LCD Displays, Other CNC Accessories, Related Accessories
LCD 12864 Control Panel Display Compatible with Ramps 1.4 Ramps 1.5 Ramps 1.6 For 3D Printer
CNC / 3D Printers, Drivers & Controllers, LCD / LED / TFT Displays, LCD Displays, Other CNC Accessories, Related AccessoriesLCD 12864 Control Panel Display Compatible with Ramps 1.4 Ramps 1.5 Ramps 1.6 For 3D Printer
The intelligent controller includes an SD card reader, rotary encoders and a 20-character× 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included.
This panel connects your RAMPS 1.4, you do not need your computer. your SD card intelligent controller power supply.
SKU: DP0842 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC
MKS DLC V2.1 Control GRBL OFFLINE Laser CNC Engraving Controller 3 axis
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNCMKS DLC V2.1 Control GRBL OFFLINE Laser CNC Engraving Controller 3 axis
MKS DLC V2.1 Control GRBL OFFLINE Laser CNC Engraving Controller 3 axis
SKU: CNC4739 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Modules, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Pulse & Frequency, Related Accessories, Robotics, Show All Modules, Signal Generators, Timers & Counters
NE555 Pulse Frequency Duty Cycle Adjustable Module Square/rectangular Wave Signal Generator
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Modules, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Pulse & Frequency, Related Accessories, Robotics, Show All Modules, Signal Generators, Timers & CountersNE555 Pulse Frequency Duty Cycle Adjustable Module Square/rectangular Wave Signal Generator
NE555 Pulse Frequency Duty Cycle Adjustable Module Square/rectangular Wave Signal Generator & Stepping Motor Driver
1.Input Voltage: 5V-15VDC. when power supply is 5V , the output current can be 15MA around;when 12V power supply, the output current can 35MA around;
2.Input current: >=100MA;
3.Output amplitude: 4.2V V-PP to 11.4V V-PP. (Different input voltage, the output amplitude will be different)
4.Maximum output current: >=15MA (5V power supply, V-PP greater than 50%), >=35MA (12V power supply, V-PP greater than 50%)
SKU: ML2151 -
CNC / 3D Printers, Drivers & Controllers, Show All CNC
RAMPS 1.4 3D Printer Control Panel Printer Controller Board
CNC / 3D Printers, Drivers & Controllers, Show All CNCRAMPS 1.4 3D Printer Control Panel Printer Controller Board
Heater/fan output and three thermistors MOSFET circuits;
Fusion 5A additional safety and component protection;
Extra bed heating control fuse 11A;
Suitable for 5 Pololu stepper driver boards;
Pololu board pin socket, easy to be replaced and removed;
I2C and SPI pin for extended use; All MOSFET into PWM pins for versatility;
SKU: CNC4688 -
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNC, Show All Robotics
Stepper Motor Driver A4988 Module with Heatsink
CNC / 3D Printers, Drivers & Controllers, Motor Drivers / PWM Controller, Robotics, Show All CNC, Show All RoboticsStepper Motor Driver A4988 Module with Heatsink
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the “step” input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
SKU: CNC4505 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC
TB6560 High-speed Optical Coupling Driver Board DC 10-35V 3A
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNCTB6560 High-speed Optical Coupling Driver Board DC 10-35V 3A
High-speed Optical Coupling DC 10-35V TB6560 3A Driver Board CNC Router Single 1 Axes Controller Stepper Motor Drivers
Features:
6N137 high-speed optical coupling, guarantee high speed without losing step.
Using the TB6560AHQ chip with low voltage shutdown, overheating stop and overcurrent protection circuit to ensure optimal performance.
SKU: CNC4536 -
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNC
TB6600 42/57/86 4.5A 40V Stepper Motor Driver *High Quality
Arduino Shields, CNC / 3D Printers, Drivers & Controllers, Motor Driver Module, Motor Driver Shield, Motor Drivers / PWM Controller, Robotics, Show All CNCTB6600 42/57/86 4.5A 40V Stepper Motor Driver *High Quality
New arrival 42/57/86 stepper motor driver 32 segments TB6600 upgraded version 4.0A 42VDC
Specifications:
This drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments, for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)
SKU: MOD3007
