Rotary Encoder Modules
Showing all 4 results
-
CNC / 3D Printers, Modules, Other CNC Accessories, Rotary Encoder Modules, Show All CNC
E6B2-CWZ6C Rotary Encoder 600P/R Omron Encoders
CNC / 3D Printers, Modules, Other CNC Accessories, Rotary Encoder Modules, Show All CNCE6B2-CWZ6C Rotary Encoder 600P/R Omron Encoders
Incremental Rotary Encoder E6B2-CWZ6C 600P/R CNC Servo Stepper Motor
Supply voltage:DC5V-5%~24V+15%
Current consumption:80mA max.
Output circuit configuration:NPNopen collector output
Output capacity:
applied voltage:30VDC max.
SKU: ML2091 -
Modules, Potentiometer, Rotary Encoder Modules, Semiconductors, Show All Modules
Rotary Encoder Module KY-040
Modules, Potentiometer, Rotary Encoder Modules, Semiconductors, Show All ModulesRotary Encoder Module KY-040
How it works: incremental encoder is a displacement of the rotary pulse signal is converted to a series of digital rotary sensors. These pulses are used to control angular displacement. In Eltra angular displacement encoder conversion using a photoelectric scanning principle. Reading system of alternating light transmitting window and the window is not consisting of radial indexing plate (code wheel) rotating basis, while being an infrared light source vertical irradiation light to the code disk image onto the receiving on the surface. Receiver is covered with a diffraction grating, which has the same code disk window width. The receiver’s job is to feel the rotation of the disc resulting changes, and change the light into corresponding electrical changes. Then the low-level signals up to a higher level, and generates no interference square pulse, which must be processed by electronic circuits. Reading systems typically employ a differential manner, about the same but the phase difference of the two waveforms different by 180°compared to the signal in order to improve the quality and stability of the output signal. Reading is then the difference between the two signals formed on the basis,thus eliminating the interference.
SKU: ML2012 -
Modules, Potentiometer, Rotary Encoder Modules, Semiconductors, Show All Modules
Rotary Encoder Module Rotating Potentiometer Module
Modules, Potentiometer, Rotary Encoder Modules, Semiconductors, Show All ModulesRotary Encoder Module Rotating Potentiometer Module
Digital rotary encoder module Rotary potentiometer Rotary potentiometer without knob cap
Working voltage: 5V
Pulses per revolution: 20
The rotary encoder can count the number of pulses output during the forward and reverse rotation by rotating. The rotation count is not like a potentiometer. There is no limit to this rotation count. With the key on the rotary encoder, it can be reset to the initial state, that is, counting from 0.
SKU: ML2132