Type: DC-DC Step Down Converter
Input voltage range: 4V-40 V
Output voltage range: 1.25V - 37V
Output current: 2A (Continuous)
Output power: 15W (Max)
*.With voltage meter display,voltage meter error of±0.1V, the range of 0~40V. (note: to ensure that the
voltage meter accuracy, please make sure that the input voltage is 4V or more).
*.Low light touch button switch measurement input or output voltage, and a light show is voltage
measurement which road, and keep the last set, even if the power switch on again.
*.Voltmeter fine-tuning: hold down the button about 1-2S into fine-tuning mode, can remove button
on the calibration at this time. (please do not use standby function, usually).
*.Long press to touch the button for 3 seconds can shut down LED display, touch again, key can
open the LED display.
*.Input voltage:4V~40V(input voltage must be higher than to the output voltage of more than 1V).
*.Output voltage adjustable range1.25V~37V adjustable (input voltage must be higher than the
output voltage is about 1.5V).
*.Maximum output current can be as high as 3A,normal and stableworking current in 2A.
*.Low the internal oscillation frequency, 150KHZ belong to the second generation of switch
voltage regulator, low consumption, high efficiency.
- *At present, the switching lights are red.
- IN+: Input Positive
IN-: Input Negative
OUT+: Output Positive
OUT-: Output Negative
- Package Include :-
1pc DC-DC 4V-40V To 1V-37V LM2596 Converter Step Down Module