Product Description

Core module HC-06, leads to interface includes VCC, GND, TXD, RXD, aside LED status output pin, the microcontroller via the pin state judge whether Bluetooth connection, KEY pin on the slave invalid

Led indicate Bluetooth connection status, flashes indicates no Bluetooth connection, Always indicate the Bluetooth port is connected and turned on Backplane 3.3V LDO, the input voltage 3.6 ~ 6V, unpaired when the current approximately 30mA, paired about 10mA, the input voltage must not exceed 7V!

interface level 3.3V, you can directly connect a variety of SCM (51, AVR, PIC, ARM, MSP430, etc.), 5V microcontroller can also be directly connected, it can not pass without MAX232 MAX232!

full-duplex serial port to use later, when paired, without knowing any Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most common communication format, not support other formats .

In the Bluetooth connection is not established when setting the baud rate supported by AT commands, names, matching password, set the parameters of power down to save. After the Bluetooth connection automatically switches to transparent mode

Package Include:

1 Pcs * HC-06 Wireless Bluetooth Transceiver RF Module Serial 4 Pin

Write a review

Please login or register to review

Bluetooth RF Transceiver Module HC-06 Slave

  • Product Code: 965334
  • Availability: In Stock
  • Rs.760.00

2 reviews / Write a review

For get more information, Click on the image.
ගෙවීම් සඳහා වැඩි විස්තර ලබා ගැනීමට, ඉහත පින්තූරය මත ක්ලික් කරන්න.

Related Products

GSM/GPRS SIM900 Board Quad-Band Module

GSM/GPRS SIM900 Board Quad-Band Module

Rs.3,590.00 Rs.3,790.00

Pro Mini Atmega328 5V 16Mhz Blue