Working temperature :-30-85degree celsius
Working voltage:DC5V / DC7.5-24V
Signal port:3pin connect port
T-1000S System features
1.32-65536 Gray,Support software Gamma correction.
2.Support point, line, surface, rules and special-shaped handle.
3.Single-port output,can support 2048 pixels.
4.Multiple controllers can be cascaded together and work synchronous,
play back content stored in the SD card.
5.Compatible with single line or double line chips.
When T1000S controller load less than 512 pixels the frame rate can reach 30fps.
When T-1000s control more than 512 pixels the frame rate will slow down automatically.
Support IC (one IC symbolize a pixel point )
Definition of buttons
1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it control 512
pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically
Regulatory function button:
System architecture diagram:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led
. Temperature :-40-85 Degree
. Volgate: DC5V / DC7.5-24V
To copy files to SD card, you must first format to the SD card,
pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.
NOTE:For the TTL(SPI) signal, the controller signal ground must connect to
the LED lamp ground directly.