My cart

0 item(s) - Rs.0.00

  • Your shopping cart is empty!

ZFT-6 TRANSMITTER + RECEIVER 6CH REMOTE 2.4G
ZFT-6 TRANSMITTER + RECEIVER 6CH REMOTE 2.4G
ZFT-6 TRANSMITTER + RECEIVER 6CH REMOTE 2.4G

ZFT-6 TRANSMITTER + RECEIVER 6CH REMOTE 2.4G

0 reviews
Rs.6,190.00
Product Code: COM-0229
Availability: 2-3 Days
Viewed 8528 times

Product Description

Specification:


- Color: Silver

- Application: fixed wing, car, boat

- Band: 2.400GHz-2.483GHz

- Transmitting power: ?100mW

- Operating Current: ? 120mA:

-: Coding method: PCM1024

-: Fine Tuning Mode: Electronic Fine Tuning Mode

- Dynamic range of rocker 80%—120%

-: Power Supply: 4.8V-6.0V (4 AA batteries)

-: Mix Control Mode: Delta Wing Mixing Mode and V-tail Mixing Mode

-: Reverse switch: 1 channel aileron, 2 channel elevator, 3 channel throttle, 4 channel direction

- Support for fixed-wing retractable landing gear and banned wings

- Low voltage prompt: battery voltage <8.4V, power indication 500MS display 1

-: Modulation mode: Use FHSS mode that conforms to European standards


Receiver Performance:

-: Band: 2.400GHz-2.483GHz:

-: Fast recovery signal

-: out of control protection function:

-: Straight line distance above ground: more than 800 meters

- : Decoding method: PPM/PCMS 1024

- : Power Supply: 4.8-6V

- : Size: 45 x 25 x 10 (mm)

- : Weight: 9.6g



The following is a quick and easy procedure for remote control transmitters and receivers for the McKay MC6A 2.4GHz:

1. Turn off transmitter and receiver power.

2. Connect the black "pair" plug to the receiver's "ID" connector

3. Connect the ESC signal cable to the third channel of the receiver and then connect the ESC to the battery.

4. At this point, it should be noted that the receiver LED will have a blinking green light.

5. Turn the transmitter throttle stick to the lowest position and turn on the transmitter.

6. When the receiver's green LED goes out, the receiver is now ready to go.

7. Remove the mating plug from the receiver.

8. Aileron servos, elevator servos and rudder servos are connected to the receiver according to your model aircraft instruction manual.

9. Finally, make sure your transmitter can fully control the bound receiver and check that each channel is normal.

10. If the test fails, repeat the entire process.

Write a review

Please login or register to review

When you order from duino.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to travel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!