Hot Air Gun Heating Element For 850A 850B 952 952B 952C 952D Series Hot Air Soldering Station Gordak

Specification:

*Senor type------ type K

*Material: ceramic, metal

*Product Model: 850A

*Length: approx.121mm

*Voltage: 220V

*Heater resistance value- ----about 80Ω

*This heater is suitable for 850A,850B,952,952C,952B,952D,952V, and 950D soldering stations, and the same machine with another different brand

Replace the heating element:

1. Tears off the silica gel tube downward, anti-clockwise release the inserted termination then open the handle elements.

2. Take out the soldering steel after open the handle units,Unplug the ground connection plug, taking out the heating element.

3. After replace,assemble the handle on opposite procedure.

Notice for replace hot air soldering station heating element:

1. Take out the heating material from the soldering iron steel pipe and make sure not damage the mica heat insulatorin it Please carefully inspect the mica heat insulator is perfect after replacing heating material each time. You must replace it first when finding damage.

Otherwise serious leakage accident may occur.

2. Don't press or ttrition the heater when install, and notice the orientation hole on the iron tube to aim at tho hanlde orientation.

3. Make sure the front of heating element not touch the front steel mesh. Otherwise serious leakage accident may occur,

4. When conncet the heating clement leads, please connectceach lead correctly and attention discrimination the Polarity of sensor lead. 

5. There are four leads of the heatig material Two in sensor, there are open model and acme model according to the port model.Open model the positive electrode of the sensor, acme port is cahode, the rest two are coupling of heating element.

Package Contents:

1 x Heating element