Feature:AC current sensor module Maximum 50A1, the module dimensions: 48mmX 40mmX 30mm2, the main chip: op-amps, transformers3, the working voltage: DC5V4, the output of the switching output5, the cur..

ACS712 20A1, the current sensor chip ACS712ELC - 202, pin 5 v power supply, the onboard power light3 30A plus or minus current can be measured, module,the corresponding analog output 100 mv/A4, no cur..

ACS712 30A1. Current sensor chip: ACS712ELC-30A;2. pin 5V power supply, on-board power indicator ;3. The module can measure the positive and negative 30 amps, corresponding to the analog output of 100..

ACS712 5A1, the current sensor chips: ACS712ELC-05B;2, pin 5V power supply, on-board power indicator;3, the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / ..

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high si..

The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUScompatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition..

DescriptionThis item is manufactured with premium material for durable and long-lasting use. It's easy to use with long service life. It can be widely used for AC motors, lighting equipment, air compr..

  The AC current sensor is based on Current transformers, it transforms the big AC current to little, and then converts to voltage with the build-in resistor so users can get the AC current value..

SpecificationsThe module can be measured within 5 alternating currentMaximum Primary Current at 50/60 Hz: 20 ACurrent Ratio: 5A:5mAWinding D.C. Resistance at 20 °C: 155 ΩAccuracy @RL ≤10 Ω: 2%..

Product Description: 1. On-board micro-precision current transformer 2. Onboard sampling resistor 3. Modules 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA..