DC 5V Real time Timing Delay Timer Relay Module Multiple Mode Control Switch Delay Module with Buzzer

DC 5V Real time Timing Delay Timer Relay Module Multiple Mode Control Switch Delay Module with Buzzer

Rs.960.00
Product Code: ACS-4153
Availability: In Stock
Viewed 181 times

Product Description

DC 5V Real time Timing Delay Timer Relay Module Multiple Mode Control Switch Delay Module with Buzzer

Real-time relay timing and clock synchronization time control delay 24H timing 5 time periods

 

Product Highlights:

Wide voltage power supply 5.0V ~ 60V;

A mode can be set for multiple time periods, can reach 5 time periods;

With a buzzer alarm function.

 

Mode introduction:

OPE: relay closing time point, CLE: relay off time point

Time period: PE-1 ~ PE-5 5 time periods (OPE to CLE is a time period)

----: function shielding

 

P-1: The relay closes or outputs pulses every day to the OPE time point, and the relay turns off or outputs pulses to the CLE time point.

 

P-2: set the day, to the OPE time point when the relay closed or output pulse, to the CLE time point when the relay disconnect / or output pulse

 

P-3: set the date of the month, to the OPE time point when the relay closed or output pulse, to the CLE time point when the relay is off or output pulse

 

P-4: Set the date 1 to date 2, start every day at the OPE time point, end to the CLE time point, relay action or output pulse

 

P-5: As with P-4, only the month can not be set

 

First, how to set the time?

 

In the time to run the interface, press the DOWN button for a while:

 

Step 1: Select the time period: PE-1 ~ PE-5 Press UP and DOWN to select;

 

Step 2: Press the SET key to select the mode: P-1 ~ P-5 (Set this time period to the corresponding mode) by pressing the UP and DOWN keys. ("----" means to block this time period)

 

Note: Each time period can be repeated from the "----", P-1 ~ P-5 one of the optional; For example,you can let five time periods at the same time work in the P-1 mode, or let Time period 1 work in P-1 mode, time period 2 work in P-2 mode and so on.

 

Step 3: After the mode selection is finished, press the SET key to enter the time period setting interface, set the interface in the time period, press the SET key to switch the parameter, "OPE" start time point, "CLE" end point, "dAE" date information;

 

Step 4: After setting the parameters to exit the settings, press the SET button for 2 seconds to release, automatically check whether the parameter settings are legal, legal to save the parameters, return to the time to run the interface; if the parameter is wrong, "ERR" reminder (for example, stop time or Date <= start time or date), return to the parameter setting interface;

Additional features: Each "time period" can be set individually

 

In the specific parameter setting interface (after the second step), press the STOP button to switch the output mode:

 

OUT1: Start time point turns on the relay, the end time is off the relay

OUT2: Outputs 1S pulse to start or end time

In the specific parameter setting interface (after the second step), press the STOP button for a while to switch the ringing mode:

BLL0: Ring disable

BLL1: Ring enable

Note: When the bell rings, press any button to stop the ring

 

STOP key function expansion:

Relay enable mode:

 

1. ON: enable relay on;

2. OFF: Do not turn on the relay, it is always off;

Press the STOP button on the time display interface to switch between ON and OFF, the current status will flash, and then return to the main interface. (This function is the emergency stop function, press once to close the closed relay)

After the relay is disabled, the product can be used as an alarm clock.

Sleep mode:

1. C-P sleep mode: within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation;

2. O-d normal mode: digital tube is always open display;

Press the STOP button for a while after 2 seconds to release, to achieve C-P and O-d state of the switch, the current state will flash, and then return to the main interface.


Package Included:

1PC*Real-time relay Module(Note: Not including batteries) 


Write a review

Please login or register to review

When you order from duino.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to travel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!