Dual socket 3A DC-DC step-down regulator charging moduleProduct size: 28*33*8mm (dual socket), 28*66*8mm (four socket)Product weight: 5.5g (dual socket), 11.5g (four socket)Input voltage range: 6-26VO..

Features:OOTDTYThe maximum peak output is current is 15A.Perfect ultra-efficient circuit design up to 94% Low Ripple.200W DC-DC high voltage power synchronous module.8-60V wide voltage input, 1-36V st..

Input Voltage : 5~20V / 7~20V /11~20V / 14~20VOutput voltage : 3.3V/5V/9V12VOutput Current : 3-4A(Max)Size : 30mm * 18mm * 4mm..

5-16V voltage input,1.25V 1.5V 1.8V 2.5V 3.3V 5V output,3A current output,short circuit point to adjust the output voltage(to avoid the phenomenon that the same type of potentiometer can be adjusted o..

use:The damage to the power board of the LCD display occupies a large proportion. Among them, power driver chips, high-power power switch tubes, sampling resistors, etc. are the most common damages. D..

use:The damage to the power board of the LCD display occupies a large proportion. Among them, power driver chips, high-power power switch tubes, sampling resistors, etc. are the most common damages. D..

Module Properties: non-isolated step-down (BUCK)Rectification: non-synchronous rectificationInput voltage: 4.75V-24VOutput voltage: 0.92V-15VOutput Current: 2A (maximum)Conversion efficiency: 95% (the..

Input Voltage : 4.5~28VOutput voltage : 0.8V~20VOutput Current : 3A(Max)Efficiency : 92%(Max)Switch Frequency : 1.5MHz(Max),1MHz(Typ)Operating Temperature : -20 to +85Size : 22mm * 17mm * 4mm..

5V step-down module SY82057 v ~ 30 v inputInput power: 7V-30V, less than 24V is recommendedOutput voltage: 5VOutput current: 5A Max.Steering gear power drive, can be directly connected to the steering..

Using a dedicated benchmark IC, and high-precision current sensing resistor can make a more stable constant currentHigh output current, the max output current can reach 9A.Low output ripple, high-freq..

Description1.Input Voltage:10-30V2.Output Voltage:9.6V3.Size:7*2cm4.Model:CA-155..

Precision 5V700mA 3.5W Isolating Switching Power Supply Module AC DC Buck Module 220 to 12V Power SupplyWorking temperature: -20 degrees to 70 degrees, high-end green gold capacitors with a temperatur..

Features:1. In+: Input positive                           2. Out+: Output positive3. GND: IN-/OUT-        &nbs..

Feature:With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current.The efficiency can be up to 96%, measured at 20A, converting 24V to 12V..

1. The recessed design does not waste space on the breadboard at all.2. The 2-channel distribution can be disconnected, and 5V and 3.3V voltages can be selected.3. Can be powered by USB and DC headPac..

New product introduction:The maximum output current is 3A, long-term operation is 2.1A, and the margin is sufficient.Adopting a new scheme design, the circuit design does not require electrolytic capa..

Name: Dual USB output 3A buck moduleInput: 6V-40V (DC5.5/2.1 jack, wiring terminal)Output: 5V/3A (MAX) (with Apple recognition resistor Efficiency: 92% (MAX)Switching frequency: 150KHZWorking tem..

100% Brand New And High QualityFor MB102 bread boardcompatible with 5V, 3.3VInput Voltage :6.5-12V (DC) or USB powerOutput voltage: 3.3V, 5V switchableMaximum Output Current: <700maTwo way independ..

Product Description:Module Properties: Non-isolated step-down module (BUCK)Rectification: Synchronous rectificationInput voltage: DC 4.75V-23VOutput voltage: DC 1.0V-17V (Adjustable, Output < Input..

Product introduction:Input voltage: 5.5V~27VOutput voltage: 5VOutput current: maximum 3AConversion efficiency: 95%Output ripple: <20uAOutput accuracy: + 0.01VOperating temperature: -40 C ~ 85 CRela..