Pixels LED Controller T1000S with SD Card DC5~24V

Pixels LED Controller T1000S with SD Card DC5~24V

Product Code: ACS-4051
Availability: 2-3 Days
Viewed 2386 times

Product Description


Memory card:

type:SD card


Store file:*.led

Physical parameters:

Working temperature :-30-85degree celsius

Working voltage:DC5V / DC7.5-24V

Working power:2W



Signal port:3pin connect port

T-1000S System features

1.32-65536 Gray,Support software Gamma correction.

2.Support point, line, surface, rules and special-shaped handle.

3.Single-port output,can support 2048 pixels.

4.Multiple controllers can be cascaded together and work synchronous,

play back content stored in the SD card.

5.Compatible with single line or double line chips.


When T1000S controller load less than 512 pixels the frame rate can reach 30fps.

When T-1000s control more than 512 pixels the frame rate will slow down automatically.

Support IC (one IC symbolize a pixel point )

Support IC (one IC symbolize a pixel point )

Definition of buttons


1. 256 Gray,Gamma correction processing software.

2. Support the rules and special-shaped handle.

3. Controller, a port output, may bring 1024/2048 light.

4. Off-line control, play back content stored in the SD card

5. T-1000C store a maximum of 16 documents

Note: The model T-1000S with one port output, When it control 512 

pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically

Connection diagram: 

Regulatory function button: 

System architecture diagram:


Specific parameters:

Memory Card:

. Type: SD Card

. Capacity: 128MB-2GB

. File Format: FAT file format

. Store files: *.led

Physical parameters:

. Weight:0.2kg

. Size:122mm*67mm*25mm

. Temperature :-40-85 Degree

. Volgate: DC5V / DC7.5-24V

. Power:3W



To copy files to SD card, you must first format to the SD card,

pay attention to is that each copy must be formatted before.

SD card must be formatted as "FAT" format.

NOTE:For the TTL(SPI) signal, the controller signal ground must connect to

the LED lamp ground directly.

Write a review

Please login or register to review

When you order from duino.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to travel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!