Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best soluti..

1.Features SIZE 0.96inch Display Mode Normally black IPSDisplay Format Graphic 80RGB*160 Dot-matrixInput Data SPI interfaceDrive IC ST7735SDimensional outline 24(W)*30 (H)*2.8+/-0.1(T)mmReso..

Feature:Display Size: 1.44 inch Material: TFT LCD Resolution: 128 x128 display Control chip: ST7735 Display area: 25.5x26.5mm Physical size: 30.0x46.5mm Interface type: S..

1. LCD size: 1.8"2. Lattice size:128 * 160 (1.8 inches)(you can adjust the display direction, both horizontal screen and vertical screen)3. LCD color: 65K full color4. Hardware interface: SPI interfac..

With time displayPin Number: 12 pinsDigit Number: 4 digitsCommon CathodeDigit Height: 0.56 inch / 1.4 cmSize (L x W ): 2 x 0.75 inch / 5 x 1.9 cmColor: RedPackage Included:1pcs X  0.56''4 Digit L..

description:OLED display, without backlight, self-illumination, display performance is better than traditional LCD display, but also reduces consumption.Driver IC: SSD1306Size: 0.91 inch OLEDResolutio..

The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line  LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included.&..

1. The module is a low-power consumption character LCD Module with a built-in controller.2. The module can be easily interfaced with a MCU.3. Display Format: 20 Characters x 4 lines.4. It is fantastic..

The module can be easily interfaced with a MCU.Display Format: 20 Characters x 4 lines.It is fantastic for Arduin based project.Supply voltage: 5V.Fully assembled and tested Serial LCD 20x4 Module.Bla..

3.5inch standard display, support HDMI input, refresh rate of 60FPS or morePhysical resolution 480x320, configurable software resolution up to 1920x1080Can be used as raspberry pie display, with touch..

Type:Common Anode             Emitting Color:Red Size: 19mm x 12.7mm x 8mm ( L x W x H ) Forward Voltage:DC1.8V Forward Current:15-20mA ..

The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube. Module features ..

The MAX7219 module is an integrated serial input / output common-cathode display driver, connecting the microprocessor and 8 bit 7-segment digital LED display, and can also connect a bar graph display..

7inch HDMI LCD (C) Features7inch IPS screen, (i)1024×600 high resolution (ii)  (i)800×480 high resolutionCapacitive touch controlSupports popular mini-PCs like Raspberry Pi, BB Black, etc.When wo..

Emitted Colour: Red.Type: common anode.Led Size: 3mm.Peak Wave Length (nm) : 625 ~ 630.Forward Voltage (V) : 2.1 ~ 2.5.Reverse Current (uA) : <= 20.Max Power Dissipation(PM): 40mW.Max Peak Forward ..

Weight:28 gColor: as picture showSize:75mmx48mm/2.95"x1.89"(inch) (approx)The rated voltage: DC12VVoltage range: DC7.0 V-13.6 VThe input power: 0.24 AThe rated speed: 9500 R.P.MTemperature range:-10....

Type: HJ12864ZWController: ST7920Display color: BlueCharacter color: whiteOther features: 5 v logic power supply, the parallel communication,high reliability, wide temperature rangePackage Included:1X..

Brand new and high qualityLCD display module with green blacklightWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in: copiers, fax machine..

SUR1602L Series is 16 characters wide, 2 row characters LCD Module, SPLC780D controller (Industry-standard HD44780 compatible controller), 6800 4/8-bit parallel interface, RoHS Compliant, built-in cha..

Here we have a very popular LCD Keypad shield for the Arduino.It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0..