Dual socket 3A DC-DC step-down regulator charging moduleProduct size: 28*33*8mm (dual socket), 28*66*8mm (four socket)Product weight: 5.5g (dual socket), 11.5g (four socket)Input voltage range: 6-26VO..

Power: 150 wInput: DC12V or DC24VOutput: AC 0-110V-172V-200V-220V multi-group voltage output(Note: Output is ac voltage of high-frequency square wave)"> can be made according to the voltage require..

Features:OOTDTYThe maximum peak output is current is 15A.Perfect ultra-efficient circuit design up to 94% Low Ripple.200W DC-DC high voltage power synchronous module.8-60V wide voltage input, 1-36V st..

Input Voltage : 5~20V / 7~20V /11~20V / 14~20VOutput voltage : 3.3V/5V/9V12VOutput Current : 3-4A(Max)Size : 30mm * 18mm * 4mm..

5-16V voltage input,1.25V 1.5V 1.8V 2.5V 3.3V 5V output,3A current output,short circuit point to adjust the output voltage(to avoid the phenomenon that the same type of potentiometer can be adjusted o..

use:The damage to the power board of the LCD display occupies a large proportion. Among them, power driver chips, high-power power switch tubes, sampling resistors, etc. are the most common damages. D..

use:The damage to the power board of the LCD display occupies a large proportion. Among them, power driver chips, high-power power switch tubes, sampling resistors, etc. are the most common damages. D..

Module Properties: non-isolated step-down (BUCK)Rectification: non-synchronous rectificationInput voltage: 4.75V-24VOutput voltage: 0.92V-15VOutput Current: 2A (maximum)Conversion efficiency: 95% (the..

Input voltage: DC 5VOutput voltage: DC 12VMax input current: 2AMax Output current: 750mA(For 500mA or less application is recommended)..

Input Voltage : 4.5~28VOutput voltage : 0.8V~20VOutput Current : 3A(Max)Efficiency : 92%(Max)Switch Frequency : 1.5MHz(Max),1MHz(Typ)Operating Temperature : -20 to +85Size : 22mm * 17mm * 4mm..

5V step-down module SY82057 v ~ 30 v inputInput power: 7V-30V, less than 24V is recommendedOutput voltage: 5VOutput current: 5A Max.Steering gear power drive, can be directly connected to the steering..

Oscillation frequency 1.2MHzefficiency is as high as 95%The circuit has short circuit protection, overheating protection function10k to adjust potentiometer, adjust the output voltageMaximum input vol..

Technical SpecificationsPower In: 5VPower Out: 12VMaximum Output Current: 2ACable Length: 1mSupported Devices: Any Broadband or fiber router operating on 12V DCWarranty: 6 monthsDesigned and manufactu..

Product name:ATX power supply boardCompatible with the port: ATX (compatible with partial BTX type)The PIN number:24 pinModel : XH - M229Switch:YesNumber of sets of output: Four sets of different volt..

Using a dedicated benchmark IC, and high-precision current sensing resistor can make a more stable constant currentHigh output current, the max output current can reach 9A.Low output ripple, high-freq..

1 small PFM control DC / DC boost controller chip onboard2, enter any 0.9V ~ 5V DC voltage, can be stable output 5V DC voltage3 onboard USB female direct USB interface device powered4 on-board input v..

Description1.Input Voltage:10-30V2.Output Voltage:9.6V3.Size:7*2cm4.Model:CA-155..

Precision 5V700mA 3.5W Isolating Switching Power Supply Module AC DC Buck Module 220 to 12V Power SupplyWorking temperature: -20 degrees to 70 degrees, high-end green gold capacitors with a temperatur..

Description:Module Properties: non-isolated step-up module (BOOST)65 * 56.5 * 23 (length * width * high) (mm)Input voltage :10-32VOutput voltage: 12-35V (adjustable)Output Current: 6A (MAX)Input Curre..

Features:1. In+: Input positive                           2. Out+: Output positive3. GND: IN-/OUT-        &nbs..