Current Sensors | Transformers, Sensors, Show All Sensors
Compare
INA3221 Triple-Channel Shunt Current Sensor Board Module I2C SMBUS
SKU: SEN1646
Availability:
Out of stock
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUScompatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.
රු970.00
Out of stock
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUScompatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.
The INA3221 senses are current on buses that can vary from 0 V to 26 V. The device is powered from a single 2.7-V to 5.5-V supply and draws 350 uA (typ)of supply current. The INA3221 is specified over the operating temperature range of –40°C to +125°C.
The I2C- and SMBUS-compatible interface features four programmable addresses.1. Triple-Channel with different bus voltage.
2. 0.1 ohms 1% 2W current sense resistor.
3. Up to +26V target voltage, with ±8mV resolution.
4. Up to ±1.638A current measurement, with ±0.4mA resolution.
5. Dimension: 38*32 mm.
6. PCB (no header or terminal block): 4.4g.
7. This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Distance Measuring Sensors, Sensors, Show All Sensors
US-015 Ultrasonic Distance Measuring Transducer Sensor
Distance Measuring Sensors, Sensors, Show All SensorsUS-015 Ultrasonic Distance Measuring Transducer Sensor
US-015 Ultrasonic Module Distance Measuring Transducer Sensor DC US-015 5V
Ultrasonic Module
Resolution up to 0.5 mm
Can realize 2 cm to 4 m non-contact ranging function, the power supply voltage is DC 5 v, working current is
2.2 mA, support GPIO communication mode
Operating temperature:0~+70°
Output mode: GPIO
SKU: SEN1564 -
Hall / Metal Sensors, Sensors, Show All Sensors
Linear Magnetic Hall Switches Speed Counting Sensor
1. has the signal output instructions.
2. single signal output.
3. effective signal output for low level.
4. sensitivity adjustable pure tone ().
5. have the field cuts have signal output
6. circuit boards output switch quantity! (can be directly by SCM)
Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to
produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the linear Hall sensor magnetometer access number 3 interface, when linear Hall magnetometer Sensor senses a key signal, LED lights, otherwise off.
SKU: SEN1556
There are no reviews yet.