My cart

0 item(s) - Rs.0.00

  • Your shopping cart is empty!

CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case
CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case

CC3D Flight Controller Board 32 Bits Processor Openpilot *With Shell Case

0 reviews
Rs.3,890.00
Product Code: QD-3720
Availability: 2-3 Days
Viewed 4265 times
Tags: Quad-Copters

Product Description

Product specification

With Shell Case size: 40mm*40mm*14mm

With Shell Case weight: 15.2g

Board size: 36mm*36mm

Net weight: 7.3g


CC3D-RAID Comes from the original CC3D chip, optimizes the PCB layout and replaces the more advanced gyroscopes;

It changes the inconvenience of the original Mirco USB port;

The new CC3D uses Betaflight ground station and firmware and parameter settings, which is simpler than the original Openpilot.

Perfect function, suitable for beginners, easier for experienced players.

Its function is stronger than ordinary F3.

Note: This flight controller does not support Openpilot firmware. Only Betaflight firmware and debugging software are supported.


The OpenPilot Copter Control 3D aka CC3D is a board more tuned to Acrobatic flying or GPS based auto-piloting. It only has one sensor, The MPU6500(Fast SPI) based Acc/Gyro. It also features a 16Mbit SPI based EEPROM chip. It has 6 ports labeled as inputs (one pin each) and 6 ports labeled as motor/servo outputs (3 pins each).

If issues are found with this board please report via the github issue tracker. 

The board has a USB port directly connected to the processor. Other boards like the Naze and Flip32 have an on-board USB to uart adapter which connect to the processor's serial port instead.

The board cannot currently be used for hexacopters/octocopters.

Tricopter & Airplane support is untested, please report success or failure if you try it.

Pinouts

The 8 pin RC_Input connector has the following pinouts when used in RX_PPM/RX_SERIAL

Write a review

Please login or register to review

When you order from duino.lk, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to travel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!