- Main Processor:AT91SAM3X8EA
- Working voltage: 3.3V
- Input voltage:7-12V
- Input voltage:6-20V Max
- Digit I/O port 54 pcs ( 12 PWM Output)
- Output current: 130mA
- 3.3V power supply pin can supply 00 mA current
- SRAM96 KB (two banks: 64KB and 32KB)
- Colock frequency:84 MHz
The Ard-uino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Ar-duino board based on a 32-bit ARM core microcontroller.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started.
The bootloader is preburned in factory from Atmel and is stored in a dedicated ROM memory. The available SRAM is 96KB in two contiguous bank of 64KB and 32KB. All the available memory (Flash, RAM and ROM) can be accessed directly as a flat addressing space.
It is possible to erase the Flash memory of the SAM3X with the onboard erase button. This will remove the currently loaded sketch from the MCU. To erase, press and hold the Erase button for a few seconds while the board is powered.
Unlike other Ar-duino boards, the Ardu-ino DUE board runs at 3.3V. The maximum voltage that the I / O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I / O pin could damage the board.